Welcome to the board <img src="/forums/images/graemlins/cheers.gif" alt="" /> We'll take baby steps here K? A little something your going to want to know is...how to get that ***** crank pulley nut off <img src="/forums/images/graemlins/bird.gif" alt="" />. Yer gonna want to take a 19mm socket and place it on the end of a breaker bar. Parking brake set and trans in park or neutral, put the socket on the pulley bolt, place the other end of the breaker bar over the drivers side frame. Pull your coil wire and just touch your ignition. This will loosen the crank pulley nut. Any other means of trying to get it off will just tick you off....and the bolt will still be there <img src="/forums/images/graemlins/lol.gif" alt="" /> You'll prolly need a puller to get the pulley off. Install is reverse sept when you put in the new seal, put a little oil on it and when installing the pulley, go slow and straight. If you need help with the T chain, just hollar. <img src="/forums/images/graemlins/cheers.gif" alt="" />