Thanks for the compliments. Yep, that is mine, sitting on West Temple everyday. Jeff, as far as missing goes, I missed the meeting because I was doing the trimming(hoping to finish and make the meeting along with the wheeling <img src="/forums/images/graemlins/rolleyes.gif" alt="" />) The way I trimmed it may have been a little different then others.

I took off the flare and but a wedge out of the fender. Larger at the bottom and followed the arc of the well. The wedged stopped about 1/3 of the way through the arc. Then I did this to retain all of the original mounting holes for the liner and the flare. I then hammered the front part of the arc(with all the mounting holes) back against where the rest of the fender is. I then tried to tack weld it(I say try because doing sheetmetal with an acytelone welder isn't easy.) I kept blowing holes in the metal. I finally got it tacked in place after burning the paint off in 2 seperate areas <img src="/forums/images/graemlins/shocked.gif" alt="" /> Then I bolted back on the flare with a litle persuasion to line up the bottom since the arc no longer matches the flare. Overall it worked, now I need to pull it all apart and finish tack welding it and then sand/prime/and paint the spot I burned away.

Overall it worked out pretty well. I wish I had taken pictures but I was in such a rush trying to make the meeting I didn't get to. <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

Oh yeah, and the backspacing of my wheels is a little less then yours Jeff so I shouldn't rub the frame. Of course I only have 10.5" wide tires right now also.

Last edited by Jonesy; 04/21/04 04:01 PM.

'97 Rodeo
3.2L V6
DOR 3" lift, 3"BL, DOR Boulder Bars, Tera-Low's, 33x10.5,Surco Safari Rack, Cobra CB, Rancho 9000's....andnNow with Half-Doors for the summer