Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: 33" tires on IFS along with rubbing (pics) [Re: Paddler] #436377 04/22/04 08:57 PM
Joined: Jun 2003
Posts: 442
kobyhud Offline
Mudrunner
Hey now Jeff that isnt true.

You have personally seen a 95 rodeo with 33X12.5s with only a suspension lift. However, I did some pretty good trimming as you well know.

Mine had 33s, now it doesnt have any tires on it. but that is another story smile.

Backspacing is the key though.

I was willing to trim bumper, and fender. I got rid of the frame rub through the rims.


95 Rodeo LS, Auto, SAS, , 60 front, 14 bolt rear. 5.13 r&p, Hydro-Assist, teras..
http://www.pieceofhud.com/gallery
Re: 33" tires on IFS along with rubbing (pics) [Re: Jeff Mason] #436378 04/23/04 05:28 AM
Anonymous
Unregistered
Quote
Quote
it looks cool, but you'll lose that piece very quickly <img src="/forums/images/graemlins/shiner.gif" alt="" />

[Linked Image]


You'll need this, too:

[Linked Image]


and a couple of these:

[Linked Image]

er, i mean these:

[Linked Image]

Re: 33" tires on IFS along with rubbing (pics) #436379 04/23/04 01:44 PM
Joined: Oct 2002
Posts: 548
jgalt Offline
Rock Warrior
Quote
and a couple of these:

[Linked Image]


NICE

Where, pray-tell, would one acquire such protuberances??

Oh, and do they come in bling-bling?? <img src="/forums/images/graemlins/lol.gif" alt="" />


Jim - ZU'tah Wheeler

'96 Rodeo LS 4x with 3.2L SOHC V6 (6VD1-V) & MUA5
Beyond that <img src="/forums/images/graemlins/evil.gif" alt="" />

<img src="/forums/images/graemlins/cheers.gif" alt="" />
Re: 33" tires on IFS along with rubbing (pics) [Re: jgalt] #436380 04/23/04 03:42 PM
Joined: Nov 2003
Posts: 344
L
Landmonster Offline
Mudrunner
Those look to be Bushwacker fender flares. Believe it or not, they carry products for our Isuzus. Why can't others follow suit?

JC-Whitney has those in their inventory. Summit carries them, but I don't know if they have some for Isuzus.

Re: 33" tires on IFS along with rubbing (pics) [Re: Landmonster] #436381 04/24/04 08:49 AM
Anonymous
Unregistered
Quote
Those look to be Bushwacker fender flares. Believe it or not, they carry products for our Isuzus. Why can't others follow suit?



well, let's see here: Ford is disappointed when they only sell 800,000 F series pickups in a year.

Isuzu would need a change of underwear if they sold 20,000 troopers.

I think that sums it up.

Re: 33" tires on IFS along with rubbing (pics) [Re: Jonesy] #436382 04/25/04 11:15 PM
Anonymous
Unregistered
Hi Steve, I'm new on this forum and I noticed your wheels. I have a 2002 Rodeo Sport with 245/70 16" wheels. Today I was looking around for chrome wheels that would fit. I checked American Racing and I'm not sure if it's the same one your have on your Rodeo, but they look the same. Do you know if American Racing makes them to fit the Rodeo Sport to fit mine without changing tires?

Jan

Re: 33" tires on IFS along with rubbing (pics) #436383 04/25/04 11:49 PM
Joined: Feb 2001
Posts: 240
T
trav Offline
Wheeler
japa-

just do a search here and you will find your back spacing, and your lug pattern. I can't remember what it is right off hand, but it is pretty common and you should be able to find just about any wheel you want to fit...

trav


1998 Isuzu Rodeo -- slightly modified.
Re: 33" tires on IFS along with rubbing (pics) #436384 04/26/04 03:52 AM
Joined: Apr 2001
Posts: 777
Jonesy Offline OP
Rock Warrior
Quote
Hi Steve, I'm new on this forum and I noticed your wheels. I have a 2002 Rodeo Sport with 245/70 16" wheels. Today I was looking around for chrome wheels that would fit. I checked American Racing and I'm not sure if it's the same one your have on your Rodeo, but they look the same. Do you know if American Racing makes them to fit the Rodeo Sport to fit mine without changing tires?

Jan


Yeah, you can get the American Racing Bajas. You would just get them in a 16x7 or a 16x8. I went for the ProComp Extreme Alloys because the holes are bigger then the AR ones. I do recommend that if you intend to go with larger tires later on you wait on rims until you need a new set of tires and get a combo in the 15" rim size, say a 31x10.5 on a 15x8" wheel. If you decide against that then all you need are 6lug on 5.5 bolt pattern. As far as I know they only come in one offest/backspacing dependent on the size.

Hope that helps.

Steve


'97 Rodeo
3.2L V6
DOR 3" lift, 3"BL, DOR Boulder Bars, Tera-Low's, 33x10.5,Surco Safari Rack, Cobra CB, Rancho 9000's....andnNow with Half-Doors for the summer
Re: 33" tires on IFS along with rubbing (pics) [Re: Jonesy] #436385 04/27/04 01:44 AM
Anonymous
Unregistered
Trav and Steve,

Thanks for the info. I'll do a search and I'll also keep in mind about waiting until I need tires.

Thanks again,
Jan

Re: 33" tires on IFS along with rubbing (pics) #436386 04/29/04 05:46 PM
Joined: Aug 2003
Posts: 57
JOEDIRT Offline
Getting the Wheeling Fever
I have been smoking crack but with enough cutting 33-10.50's will fit on a sus lifted rodeo without a BL. Take out the frnder well liner, ground down the flange in the back of the wheel well, Cut the fender back 2" all the way around as well as the bumper and the front valence, then undercoat the whole fender well to keep it from rusting. I am also running 15X8 with 3.75 backspacing. I have 31's but have run 33's and they didn't rub. <img src="/forums/images/graemlins/cheers.gif" alt="" />


97 TJ SE, intake, baja wheels, 31" mudders
Stripped down to a rollin gas can.
Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.012s Queries: 16 (0.008s) Memory: 0.6320 MB (Peak: 0.7564 MB) Data Comp: Off Server Time: 2026-11-17 13:49:04 UTC
Valid HTML 5 and Valid CSS