IFS bump stop question..

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

IFS bump stop question.. #43742 11/26/02 08:41 PM

Joined: Aug 2000

Posts: 244

Monte Vista,Co

RAZZMATAZ

Wheeler

What would happen if I lowered my UCA bump stop mounts?? Or should I just cut off the mounts all together?

I removed the rubber bump stop a few years ago, but I am getting tired of the popping sound every time the suspension "tops out".

Anyone ever tried this??

Cheers
RAZZ

87 4Runner 22R-TE
4 Pro Comp IFS
63 Chevy springs
5.71 gears
Detroit in rear, Lockright in front
35 MT/R
Rancho 9000
Jacobs ProStreet ign module and Ultra coil
1992 3VZ-E swapped in

Entire Thread
Subject	Posted By	Posted
IFS bump stop question..	RAZZMATAZ	11/26/02 08:41 PM
Re: IFS bump stop question..	Rodgertheshrubber	11/27/02 01:00 AM
Re: IFS bump stop question..	Brian894X4	11/27/02 01:40 AM
Re: IFS bump stop question..	Anonymous	11/27/02 02:09 AM
Re: IFS bump stop question..	Anonymous	11/27/02 05:57 AM
Re: IFS bump stop question..	code33	11/27/02 07:49 AM
Re: IFS bump stop question..	RAZZMATAZ	11/27/02 08:14 AM
Re: IFS bump stop question..	elripster	11/27/02 05:07 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.555s Queries: 15 (3.552s) Memory: 0.6076 MB (Peak: 0.6406 MB) Data Comp: Off Server Time: 2026-06-20 15:45:16 UTC
Valid HTML 5 and Valid CSS