u bolt flip on trapped springs???

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: u bolt flip on trapped springs??? [Re: Dok] #440057 04/28/04 05:33 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

I make mine 5" wide x 8" long, 1" bend on each end, so 6" long in contact with the spring. I do make mine for 5/8" u-bolts, holes are 3/4" for clearance, added to 2.5" wide spring perch gives 4" to the outside of the holes, 1/2" extra metal on each side is 5" wide.

Last edited by 4Crawler; 04/28/04 05:36 AM.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
u bolt flip on trapped springs???	94krawler	04/23/04 05:30 AM
Re: u bolt flip on trapped springs???	4Crawler	04/23/04 05:41 AM
Re: u bolt flip on trapped springs???	94krawler	04/27/04 06:21 AM
Re: u bolt flip on trapped springs???	ad54runner	04/27/04 06:51 PM
Re: u bolt flip on trapped springs???	4Crawler	04/27/04 08:00 PM
Re: u bolt flip on trapped springs???	94krawler	04/28/04 01:22 AM
Re: u bolt flip on trapped springs???	4Crawler	04/28/04 01:44 AM
Re: u bolt flip on trapped springs???	Dok	04/28/04 03:36 AM
Re: u bolt flip on trapped springs???	4Crawler	04/28/04 05:33 AM
Re: u bolt flip on trapped springs???	94krawler	04/28/04 05:45 AM
Re: u bolt flip on trapped springs???	4Crawler	04/28/04 03:54 PM
Re: u bolt flip on trapped springs???	Dok	04/28/04 02:24 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: