<img src="/forums/images/graemlins/nana.gif" alt="" />Man,you are in for pure hell replacing those bushings!Go ahead and buy new cam bolts from the dealer.Don't waste time heating and beating on the old bolts.Find a sawzall and cut the bolt on each side of the sleeve.When you get both sleeves out,cut or burn all the old bushing off.Then you might be lucky enough to soak them in some lubricant and drive whats left of the old bolt out.I couldn't find any replacement sleeves anywhere except the ones that came with the toyo bushings.I was able to reuse one of my sleeves but had to make the other one out of a peice of pipe.By the way,I've got a complete upper and lower set of daystars unopened.You can have'em for $25 and that includes shipping!Good luck! <img src="/forums/images/graemlins/cheers.gif" alt="" />