|
|
|
|
new lower control arm bushings
#440694
04/25/04 12:24 AM
|
Joined: Mar 2003
Posts: 207
OP
Wheeler
|
im finally putting the lift into my pig but i need to replace my control arm bushings.
they are completely unsalvagable obviously
i went to the parts store and they quoted me on 81 bucks a piece.
bs. right?
i was wondering if anyone fabs up the bushings with the sleeve, maybe in acrylic?
i cant bear to go to the dealership and have them jack me ,like they did on the cam bolts.
anyone?
85 4runner/duals/detroits f&r/5.29s/winch/stuff
|
|
Re: new lower control arm bushings
[Re: hunterp]
#440695
04/25/04 12:44 AM
|
Joined: Mar 2003
Posts: 207
OP
Wheeler
|
i checked out some daystars for like 35 bucks but they require that you reuse the sleeve.
is this wise, considering i will most likely be melting/beating the seized bushing off the sleeve?
85 4runner/duals/detroits f&r/5.29s/winch/stuff
|
|
Re: new lower control arm bushings
[Re: hunterp]
#440696
04/25/04 02:31 AM
|
Joined: Mar 2003
Posts: 433
Mudrunner
|
<img src="/forums/images/graemlins/nana.gif" alt="" />Man,you are in for pure hell replacing those bushings!Go ahead and buy new cam bolts from the dealer.Don't waste time heating and beating on the old bolts.Find a sawzall and cut the bolt on each side of the sleeve.When you get both sleeves out,cut or burn all the old bushing off.Then you might be lucky enough to soak them in some lubricant and drive whats left of the old bolt out.I couldn't find any replacement sleeves anywhere except the ones that came with the toyo bushings.I was able to reuse one of my sleeves but had to make the other one out of a peice of pipe.By the way,I've got a complete upper and lower set of daystars unopened.You can have'em for $25 and that includes shipping!Good luck! <img src="/forums/images/graemlins/cheers.gif" alt="" />
87'4runner-22re,5spd
|
|
Re: new lower control arm bushings
[Re: solarcrew]
#440697
04/25/04 05:48 AM
|
Joined: Mar 2003
Posts: 207
OP
Wheeler
|
nah brah i already got the cam bolts. nice 80 bucks dropped at the stealership..love it!
give me your email, we'll talk business.
85 4runner/duals/detroits f&r/5.29s/winch/stuff
|
|
Re: new lower control arm bushings
[Re: hunterp]
#440698
04/25/04 08:10 AM
|
Joined: Feb 2000
Posts: 4,690
Roll Me Over
|
I don't know what you guys are talkin' about, but just in case this helps you with a custom solution... I had www.spidertrax.com machine some sleeves to press-fit onto rear lower control link rubber bushings. They sell it as a product now, including the bushings. Link here and here. They're most likely a different size bushing than whatever you have, but it might be a possibility. These are hard rubber but still might be too soft for use in the front since they're rubber and intended to flex some. I'm not sure.
Jeff 2000 4Runner SR5, supercharger, rear e-locker, ARB front locker, 285/75R16 MT/R's, custom bumpers & skids 2007 Tacoma double cab 4x4 - stock
|
|
Re: new lower control arm bushings
[Re: Jeff the marmot]
#440699
04/25/04 04:57 PM
|
Joined: Mar 2003
Posts: 433
Mudrunner
|
<img src="/forums/images/graemlins/smile.gif" alt="" />Hunter,you got mail. later,doug
87'4runner-22re,5spd
|
|
|
|
|
|