blah, leaky 3vze

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: blah, leaky 3vze [Re: 88Runnerv65spd] #441078 04/27/04 10:17 PM

Anonymous

Unregistered

You will need the gasket between the air intake chamber and the actual intake manifold. You will also need the EGR gaskets since it has to come off to get the air intake off. You do not need the head to manifold gaskets. Might also want to change the PCV valve since it is a pain with the intake chamber in place.

Entire Thread
Subject	Posted By	Posted
blah, leaky 3vze	Greg_Canada	04/26/04 03:02 AM
Re: blah, leaky 3vze	Anonymous	04/26/04 02:19 PM
Re: blah, leaky 3vze	88Runnerv65spd	04/27/04 09:08 PM
Re: blah, leaky 3vze	Anonymous	04/27/04 10:17 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.524s Queries: 16 (3.521s) Memory: 0.5958 MB (Peak: 0.6288 MB) Data Comp: Off Server Time: 2026-06-12 16:40:45 UTC
Valid HTML 5 and Valid CSS