I have the Calmini and like it (UCAs and SAW torsion bars) - no service problems. The only thing, I'd do without is the cross-member (yeah, its lower and blocks the oil drain) and shocks (I wasn't given this option).

FWIW I run Procomp ES3000s in rear and ES9000s in front and like it. I bought another stock cross member (after tossing the orignial out <img src="/forums/images/graemlins/rolleyes.gif" alt="" />) and added a full skid plate from the front axle back to the mid-crossmember <img src="/forums/images/graemlins/kewl.gif" alt="" />.

Last edited by jgalt; 04/29/04 05:18 AM.
Jim - ZU'tah Wheeler

'96 Rodeo LS 4x with 3.2L SOHC V6 (6VD1-V) & MUA5
Beyond that <img src="/forums/images/graemlins/evil.gif" alt="" />

<img src="/forums/images/graemlins/cheers.gif" alt="" />