Can't shift.... Clutch or Master Cylinder?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Can't shift.... Clutch or Master Cylinder? [Re: distilled] #442417 05/02/04 11:46 PM

Anonymous

Unregistered

I had a similar problem on a 1981 toyota 22r 5 speed. In my case it was a broken/damaged clutch preasure plate.

Entire Thread
Subject	Posted By	Posted
Can't shift.... Clutch or Master Cylinder?	distilled	04/28/04 06:10 PM
Re: Can't shift.... Clutch or Master Cylinder?	azrain	04/28/04 07:33 PM
Re: Can't shift.... Clutch or Master Cylinder?	distilled	04/28/04 09:44 PM
Re: Can't shift.... Clutch or Master Cylinder?	Anonymous	04/28/04 11:45 PM
Re: Can't shift.... Clutch or Master Cylinder?	Anonymous	04/30/04 04:16 AM
Re: Can't shift.... Clutch or Master Cylinder?	distilled	05/02/04 09:02 PM
Re: Can't shift.... Clutch or Master Cylinder?	Anonymous	05/02/04 11:46 PM
Re: Can't shift.... Clutch or Master Cylinder?	azrain	05/03/04 04:44 AM
Re: Can't shift.... Clutch or Master Cylinder?	distilled	05/03/04 04:28 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.526s Queries: 16 (3.523s) Memory: 0.6047 MB (Peak: 0.6377 MB) Data Comp: Off Server Time: 2026-06-14 17:30:17 UTC
Valid HTML 5 and Valid CSS