Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
code 12 (knock sensor) ? #44340 12/05/02 02:57 AM
Joined: Jan 2000
Posts: 102
toyrker Offline OP
Wheeler
Broke wire to knock sensor. Spliced , no luck. Searched & found a couple of threads. One said the wire to EFI comp. is a special ground wire. The dealer knows nothing about this wire. Does anyone have part # or suggestions? It also set a soft code 3. Don't know if this is related. I'll work on it tomorrow. It's kind of icy out tonight <img border="0" alt="[Yawn]" title="" src="graemlins/yawn.gif" />


85 4runner, 22re,cam, headers,2.25free flow exhaust,3"susp lift, 33's,custom bumpers,& stuff
Re: code 12 (knock sensor) ? #44341 12/05/02 04:32 AM
Joined: Apr 2001
Posts: 606
904runner2dr Offline
Rock Warrior
Tell your parts man it should be part # 82219-XXXXX.I don't remember the exact # cause I left Toyota almost 4 years ago.I am with Lexus now but the first five of the part #'s are the same.If you really can't find it e-mail me you Vin and I could get it for you.

Re: code 12 (knock sensor) ? #44342 12/05/02 06:49 AM
Anonymous
Unregistered
What do you have, to be able to read error codes?
Can you use a palm pilot or pocket PC's?

Just curious.

Thanks

<small>[ December 05, 2002, 05:33 AM: Message edited by: ringo234 ]</small>

Re: code 12 (knock sensor) ? #44343 12/05/02 07:20 PM
Joined: Jan 2000
Posts: 454
Toy4x Offline
Mudrunner
You may be able to splice that connection, but if it "broke", it could be too damaged to splice (ie broke in more than one spot).
I don't think this is a splice repair you'd do with a typical butt connector, you'd need to solder & shrink tube it, and be careful not to get it too hot as it could foul the sensor.

I ran mine for a looonnng time with a bad k code, and didn't suffer severe bad affects.

ringo, you can retrieve codes with a small jumper wire, and counting blinks on the "check engine" idiot light, a search will tell you the exact details.


Toy4x
90 ExCab SR5 V6 Auto In need
99 Taco samesame(ish)
Re: code 12 (knock sensor) ? #44344 12/05/02 10:30 PM
Joined: Jan 2000
Posts: 102
toyrker Offline OP
Wheeler
Do you think I could just run new wire from sensor to comp? Any one done this? I'm going to try to splice again with solder joint. Sounds good to me. Brrrr its cold out there in that shed. Will let you know what happens. The coil wire had come loose while I was fooling around with chk connector & had set the code 3. <img border="0" title="" alt="[Big Grin]" src="images/icons/grin.gif" />


85 4runner, 22re,cam, headers,2.25free flow exhaust,3"susp lift, 33's,custom bumpers,& stuff

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.033s Queries: 14 (0.029s) Memory: 0.6007 MB (Peak: 0.6603 MB) Data Comp: Off Server Time: 2026-11-18 03:41:05 UTC
Valid HTML 5 and Valid CSS