You may be able to splice that connection, but if it "broke", it could be too damaged to splice (ie broke in more than one spot).
I don't think this is a splice repair you'd do with a typical butt connector, you'd need to solder & shrink tube it, and be careful not to get it too hot as it could foul the sensor.

I ran mine for a looonnng time with a bad k code, and didn't suffer severe bad affects.

ringo, you can retrieve codes with a small jumper wire, and counting blinks on the "check engine" idiot light, a search will tell you the exact details.


Toy4x
90 ExCab SR5 V6 Auto In need
99 Taco samesame(ish)