Camber adjustment on Dana 30

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Camber adjustment on Dana 30 [Re: 80CJ] #443861 05/02/04 08:01 AM

Anonymous

Unregistered

Well I never turn my wheels compleatly while in 4wd thats a good way to snap a u-joint on the axel shaft.

Entire Thread
Subject	Posted By	Posted
Camber adjustment on Dana 30	80CJ	05/02/04 06:46 AM
Re: Camber adjustment on Dana 30	Anonymous	05/02/04 08:01 AM
Re: Camber adjustment on Dana 30	superdawg	05/03/04 12:33 AM
Re: Camber adjustment on Dana 30	80CJ	05/03/04 02:24 AM
Re: Camber adjustment on Dana 30	superdawg	05/03/04 05:38 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.632s Queries: 16 (4.105s) Memory: 0.5974 MB (Peak: 0.6304 MB) Data Comp: Off Server Time: 2026-11-06 23:09:12 UTC
Valid HTML 5 and Valid CSS