Rear Disk Brake Conversion

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear Disk Brake Conversion [Re: Pedro] #446722 05/07/04 04:11 AM

Anonymous

Unregistered

The most important thing you need to do is come up with a caliper for the reat that is a good match for the fronts. The Monte Carlo caliper that some existing kits use is a front caliper with 1 very large piston, and IS NOT a good fit for this system.

Next is the e-brake. Some people use a Cadillac caliper with e-brake but say it is a PITA to keep adjusted.

Good luck.

Entire Thread
Subject	Posted By	Posted
Rear Disk Brake Conversion	Pedro	05/06/04 11:05 PM
Re: Rear Disk Brake Conversion	greg_mgm	05/07/04 12:10 AM
Re: Rear Disk Brake Conversion	mainer	05/07/04 01:09 AM
Re: Rear Disk Brake Conversion	Pedro	05/07/04 02:18 AM
Re: Rear Disk Brake Conversion	Anonymous	05/07/04 04:11 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.524s Queries: 16 (3.522s) Memory: 0.5982 MB (Peak: 0.6312 MB) Data Comp: Off Server Time: 2026-06-21 02:31:01 UTC
Valid HTML 5 and Valid CSS