Gen 2 Maint Req Light

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gen 2 Maint Req Light [Re: JunkIt] #447511 05/08/04 07:21 PM

Joined: May 2003

Posts: 484

Evanston, WY

madmitch

Mudrunner

Its easy. Just take off the cluster cover, then its something like 3 or 4 screws to revome the actual cluster. Its a little black switch, takes about 5 minutes. <img src="/forums/images/graemlins/kewl.gif" alt="" />

[color:"red"]1992 Monty SR, bouncy seat, custom steering wheel, torsion lift, BFG 31" AT, luxurious wood interior. 230k. [/color]
"Give the bully another point."

Entire Thread
Subject	Posted By	Posted
Gen 2 Maint Req Light	JunkIt	05/08/04 06:40 PM
Re: Gen 2 Maint Req Light	madmitch	05/08/04 07:21 PM
Re: Gen 2 Maint Req Light	JunkIt	05/08/04 07:48 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.499s Queries: 16 (3.497s) Memory: 0.5971 MB (Peak: 0.6301 MB) Data Comp: Off Server Time: 2026-06-18 00:11:18 UTC
Valid HTML 5 and Valid CSS