not really a tie rod issue but a geometry one.

when the a-arms and the tie rods dont move in the same arc, you get this toe in problem on severe lifts.

my WCOR kit has a bad one. so bad that people think i broke something up front since both tire are pointing in.

note that when you jack up one tire, it will tend to toe in.

now give it gas while climbing and this is multiplied.

take a look at both upper and lower a-arms. then look at the tie-rod.

if all three are NOT parallel, that is the problem... live with it or fix it...

i've kinda lived with my issue. nothing is hurt. i'm about 6-8 years now with my setup.