2.3L to 2.6L swap and head questions

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2.3L to 2.6L swap and head questions [Re: coldrain] #447753 05/13/04 11:48 PM

Joined: Mar 2002

Posts: 108

Edmonton, Alberta Canada

coldrain

Wheeler

Opps forgot to add, You should use the 2.3 flywheel and starter on the 2.6 engine. I was told the teeth are different.

Entire Thread
Subject	Posted By	Posted
2.3L to 2.6L swap and head questions	800XL	05/09/04 08:19 AM
Re: 2.3L to 2.6L swap and head questions	coldrain	05/10/04 06:39 AM
Re: 2.3L to 2.6L swap and head questions	coldrain	05/13/04 11:48 PM
Re: 2.3L to 2.6L swap and head questions	800XL	05/14/04 02:21 AM
Re: 2.3L to 2.6L swap and head questions	Anonymous	05/17/04 12:02 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.617s Queries: 16 (3.615s) Memory: 0.6006 MB (Peak: 0.6336 MB) Data Comp: Off Server Time: 2026-05-31 04:19:25 UTC
Valid HTML 5 and Valid CSS