|
|
|
|
89 trooper 2.6L 4ZE1 into 89 p-up?
#449013
05/12/04 03:36 AM
|
Joined: Mar 2002
Posts: 198
OP
Wheeler
|
will this trooper motor swap into a same year p-up 5 spd 2wd. is the oil pan different? will the p-up tranny work? same clutch? are the trooper and the p-up 2.6 the same? any input would be great
Last edited by doby/reddevil; 05/12/04 06:17 AM.
|
|
Re: 89 trooper 2.6L 4ZE1 into 89 p-up?
[Re: doby/reddevil]
#449014
05/13/04 03:09 AM
|
Joined: Feb 2000
Posts: 166
Wheeler
|
This doesn't exactly answer your question but I put a 90 somthing PUP engine in my 88 trooper (Got off eBay). You really need a doner engine to swap the wiring harness (swap intakes). The PUP and the Trooper of SOME vintages have slightly different distributors and wiring harnesses. Everything else fit no problem. I have a spare manual wiring harness and PUP distributor if you want.
Good Luck,
Kevin
Last edited by Kevin Wolford; 05/13/04 03:11 AM.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 1.956s Queries: 15 (0.003s) Memory: 0.5872 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-06-10 11:19:32 UTCValid HTML 5 and Valid CSS