89 trooper 2.6L 4ZE1 into 89 p-up?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 89 trooper 2.6L 4ZE1 into 89 p-up? [Re: doby/reddevil] #449014 05/13/04 03:09 AM

Joined: Feb 2000

Posts: 166

Westminster, MD

Kevin Wolford Offline

Wheeler

This doesn't exactly answer your question but I put a 90 somthing PUP engine in my 88 trooper (Got off eBay). You really need a doner engine to swap the wiring harness (swap intakes). The PUP and the Trooper of SOME vintages have slightly different distributors and wiring harnesses. Everything else fit no problem. I have a spare manual wiring harness and PUP distributor if you want.

Good Luck,

Kevin

Last edited by Kevin Wolford; 05/13/04 03:11 AM.

Entire Thread
Subject	Posted By	Posted
89 trooper 2.6L 4ZE1 into 89 p-up?	doby/reddevil	05/12/04 03:36 AM
Re: 89 trooper 2.6L 4ZE1 into 89 p-up?	Kevin Wolford	05/13/04 03:09 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.940s Queries: 16 (3.503s) Memory: 0.5946 MB (Peak: 0.6276 MB) Data Comp: Off Server Time: 2026-06-15 20:59:17 UTC
Valid HTML 5 and Valid CSS