Help! Pitman arm.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Help! Pitman arm. [Re: CAskier] #449189 05/12/04 05:43 PM

Anonymous

Unregistered

hit the end of the puller with a hammer (the part the socket or wrench goes). tighten it down some more and hit it again, do this repeatedly untill it comes off. a little pb blaster never hurts either. don't hit the arm from the side as it can snap the shaft.

Entire Thread
Subject	Posted By	Posted
Help! Pitman arm.	CAskier	05/12/04 05:19 PM
Re: Help! Pitman arm.	Anonymous	05/12/04 05:43 PM
Re: Help! Pitman arm.	CAskier	05/12/04 05:43 PM
Re: Help! Pitman arm.	Anonymous	05/12/04 11:05 PM
Re: Help! Pitman arm.	CAskier	05/12/04 11:53 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.602s Queries: 16 (3.461s) Memory: 0.5977 MB (Peak: 0.6307 MB) Data Comp: Off Server Time: 2026-06-15 23:19:03 UTC
Valid HTML 5 and Valid CSS