FYI on 4ZE1 head gasket...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: FYI on 4ZE1 head gasket... [Re: strawmyers] #449608 05/13/04 04:55 PM

Joined: Nov 2003

Posts: 78

lowflying90 Offline

Getting the Wheeling Fever

i was told isuzu did not use yield to torque head bolts.

Jeff

Last edited by lowflying90; 05/13/04 04:56 PM.

Entire Thread
Subject	Posted By	Posted
FYI on 4ZE1 head gasket...	Anonymous	05/13/04 04:34 AM
Re: FYI on 4ZE1 head gasket...	litnin	05/13/04 02:50 PM
Re: FYI on 4ZE1 head gasket...	Anonymous	05/18/04 01:53 PM
Re: FYI on 4ZE1 head gasket...	strawmyers	05/13/04 04:01 PM
Re: FYI on 4ZE1 head gasket...	lowflying90	05/13/04 04:55 PM
Re: FYI on 4ZE1 head gasket...	litnin	05/13/04 11:36 PM
Re: FYI on 4ZE1 head gasket...	chasespeed	05/14/04 12:28 AM
Re: FYI on 4ZE1 head gasket...	pucci	05/14/04 01:50 AM
Re: FYI on 4ZE1 head gasket...	doby/reddevil	05/14/04 04:33 AM
Re: FYI on 4ZE1 head gasket...	Anonymous	05/15/04 01:56 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.903s Queries: 16 (3.901s) Memory: 0.6111 MB (Peak: 0.6441 MB) Data Comp: Off Server Time: 2026-06-14 05:25:39 UTC
Valid HTML 5 and Valid CSS