YouÆre doomed I tell yaà DOOOOOOOOOOOOOMED! <img src="/forums/images/graemlins/evil.gif" alt="" />

LMAO! <img src="/forums/images/graemlins/lol.gif" alt="" />


A set of 33s on a stock-height Rodeo sounds like a sure-fire recipe for rubbing to meà
Although, without a lift, I seriously doubt you would (or should I say: æCOULDÆ) damage your new tires very much, because in all likelihood, you wouldnÆt even be able to get out of the driveway!

Depending on the offset/backspacing of the wheels in question, youÆre probably looking at needing some lift (suspension or body), a fair-bit of front fender-well trimming, and maybe a smidgen of rear trimming too. --- ItÆs possible to get the rears to clear without any trimming, provided that the offset is far enough inboard (stock wheels should be fine for that)à but either way, those fronts are absotively gonna need some tender-loving BFH and/or Sawz-All persuasion (and thatÆs with or without the lift).

HTH <img src="/forums/images/graemlins/kewl.gif" alt="" />


Cheers! <img src="/forums/images/graemlins/cheers.gif" alt="" />
Smiley