Quote
Quote
Ya know, I kinda doubt one observation in that thread, that first gear is part of the shaft. Its pressed on. I don't know if it could be pressed off and a new one reliably pressed on though.


I don't think they are talking about 1st gear, they are talking about "THE" first gear on the input shaft. It is part of the input shaft, and I believe it has been welded on. The problem with this, is that this gear is different on the R151 and the R154. This gear drives the counter shaft. This caused a hole slew of problems, but still makes it possible. From what I have read, you get a terrible 1st gear because of all this.


Yep, same gear I was referring to. I think its pressed on, because a mechanic friend uses the input shaft sans gear as a clutch tool. Mind you, I doubt my 12 ton press could separate it (there's 'merely' pressed on, then there is REALLY QUITE SINCERELY pressed on). <img src="/forums/images/graemlins/lol.gif" alt="" />


-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell