Spring Spacers (still a budget lift)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Spring Spacers (still a budget lift) [Re: PHIL_] #453151 05/21/04 04:45 AM

Anonymous

Unregistered

I always wondered if you should coat aluminum before using it anywhere on the body/frame - isn't there something about the steel corroding faster when it's in contact with aluminum or am I remembering it wrong?

Shawn

Entire Thread
Subject	Posted By	Posted
Spring Spacers (still a budget lift)	BTrout	05/21/04 04:07 AM
Re: Spring Spacers (still a budget lift)	PHIL_	05/21/04 04:15 AM
Re: Spring Spacers (still a budget lift)	Anonymous	05/21/04 04:45 AM
Re: Spring Spacers (still a budget lift)	BTrout	05/21/04 05:02 AM
Re: Spring Spacers (still a budget lift)	Lee N	05/21/04 03:34 PM
Re: Spring Spacers (still a budget lift)	BTrout	05/22/04 02:30 PM
Re: Spring Spacers (still a budget lift)	Big Blue	05/22/04 05:20 PM
Re: Spring Spacers (still a budget lift)	TobyB	05/24/04 08:28 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.932s Queries: 16 (3.929s) Memory: 0.6051 MB (Peak: 0.6381 MB) Data Comp: Off Server Time: 2026-11-07 02:41:08 UTC
Valid HTML 5 and Valid CSS