Timing Chain Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Timing Chain Question #454162 05/24/04 04:19 AM

Joined: Oct 2003

Posts: 8

razerror

Need a Spot

When the timing chain bright links are in alignment with the marks on the crank and timing sprockets and the pully is on top dead center of the compression stroke on no. 1 cylinder. How many revolutions of the crank to the same alignment of chain links, sprocket marks, and TDC of no. 1
occurs again? I am talking about a late model 22re.

Entire Thread
Subject	Posted By	Posted
Timing Chain Question	razerror	05/24/04 04:19 AM
Re: Timing Chain Question	Anonymous	05/24/04 04:33 AM
Post deleted by little_joe	Anonymous	05/24/04 06:34 AM
Re: Timing Chain Question	Paul Elbisser	05/24/04 08:34 AM
Re: Timing Chain Question	Esquire812	05/24/04 06:46 PM
Post deleted by little_joe	Anonymous	05/24/04 08:22 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.495s Queries: 15 (3.493s) Memory: 0.6017 MB (Peak: 0.6346 MB) Data Comp: Off Server Time: 2026-06-13 00:50:53 UTC
Valid HTML 5 and Valid CSS