|
|
|
|
Codes 25&26
#455406
05/26/04 02:48 AM
|
Joined: Dec 2003
Posts: 12
OP
Need a Spot
|
I get a code 25&26(o2 lean-O2 rich) at the same time on my 22re. I replaced the o2 sensor to no avail. Clearing the codes shuts it off for a day or so. Wiring harness to sensor looks good. Where else should I look? Thanks.
|
|
Re: Codes 25&26
[Re: nader454]
#455407
05/26/04 05:44 AM
|
Joined: Jun 2001
Posts: 675
Rock Warrior
|
I used to get this too on my 3.0. Never understood how you could get both codes (lead/rich) at the same time. Since you've changed the O2 sensor, try cleaning the TB and/or airfilter. Not sure why, but this resolved the code for me.
Last edited by abalagtas; 05/26/04 05:46 AM.
|
|
Re: Codes 25&26
[Re: nader454]
#455408
05/26/04 09:28 PM
|
|
Anonymous
Unregistered
|
Did you use a Toyota O2 Sensor or a am? See, if you used an am vs. the Toy brand, sometimes the "nipple" isn't long enough to read the flow of gasses going through the pipe! Also, like Albagtas said: clean your T-body out! Good Luck! <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
Re: Codes 25&26
#455409
05/27/04 06:01 AM
|
Joined: Dec 2003
Posts: 12
OP
Need a Spot
|
Thanks, I'll give it a try. I used a bosch universal sensor.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5943 MB (Peak: 0.6524 MB) Data Comp: Off Server Time: 2026-06-09 11:33:50 UTCValid HTML 5 and Valid CSS