Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Codes 25&26 #455406 05/26/04 02:48 AM
Joined: Dec 2003
Posts: 12
N
nader454 Offline OP
Need a Spot
I get a code 25&26(o2 lean-O2 rich) at the same time on my 22re. I replaced the o2 sensor to no avail. Clearing the codes shuts it off for a day or so. Wiring harness to sensor looks good. Where else should I look? Thanks.

Re: Codes 25&26 [Re: nader454] #455407 05/26/04 05:44 AM
Joined: Jun 2001
Posts: 675
fire4effect Offline
Rock Warrior
I used to get this too on my 3.0. Never understood how you could get both codes (lead/rich) at the same time. Since you've changed the O2 sensor, try cleaning the TB and/or airfilter. Not sure why, but this resolved the code for me.

Last edited by abalagtas; 05/26/04 05:46 AM.
Re: Codes 25&26 [Re: nader454] #455408 05/26/04 09:28 PM
Anonymous
Unregistered
Did you use a Toyota O2 Sensor or a am? See, if you used an am vs. the Toy brand, sometimes the "nipple" isn't long enough to read the flow of gasses going through the pipe!
Also, like Albagtas said: clean your T-body out!
Good Luck! <img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: Codes 25&26 #455409 05/27/04 06:01 AM
Joined: Dec 2003
Posts: 12
N
nader454 Offline OP
Need a Spot
Thanks, I'll give it a try. I used a bosch universal sensor.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5955 MB (Peak: 0.6537 MB) Data Comp: Off Server Time: 2026-06-09 11:35:14 UTC
Valid HTML 5 and Valid CSS