body work q

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

body work q #456364 05/27/04 10:17 PM

Joined: May 2004

Posts: 927

in the eye of lake superior

Macka

Rock Warrior

How hard would it be to fab a D50 cab on to a Raider Frame? The box would be easy but I was curious if anybody knew how close a fit I would have with a P/U cab.

always working

Entire Thread
Subject	Posted By	Posted
body work q	Macka	05/27/04 10:17 PM
Re: body work q	FrankR	05/27/04 10:27 PM
Re: body work q	Macka	05/27/04 10:30 PM
Re: body work q	off-roader	05/27/04 10:40 PM
Re: body work q	Macka	05/27/04 10:45 PM
Re: body work q	NathanC	05/28/04 12:15 AM
Re: body work q	Macka	05/28/04 01:47 AM
Re: body work q	NathanC	05/28/04 02:54 AM
Re: body work q	Macka	05/28/04 03:14 PM
Re: body work q	NathanC	05/28/04 11:22 PM
Re: body work q	Macka	05/28/04 11:33 PM
Re: body work q	NathanC	05/28/04 11:36 PM
Re: body work q	Macka	05/29/04 12:03 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.628s Queries: 15 (3.626s) Memory: 0.6185 MB (Peak: 0.6515 MB) Data Comp: Off Server Time: 2026-06-04 03:00:03 UTC
Valid HTML 5 and Valid CSS