head work

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: head work [Re: jeepfun4u2] #458825 06/03/04 04:23 AM

Joined: Oct 2003

Posts: 7,768

Central Texas

BigJim

Web Wheeler

I doubt you would see any gains at all from messing with the head at this stage.
Maybe if you did the intake and exhaust and then a GREAT job on the head with a 270*-280* cam you would find some good gain... But one without the other is pretty useless. Especially doing the head first.
I'd start with a cam and timing setup and then work up to the the head job.
Big Jim

Entire Thread
Subject	Posted By	Posted
head work	jeepfun4u2	06/03/04 03:33 AM
Re: head work	BigJim	06/03/04 04:23 AM
Re: head work	Anonymous	06/03/04 07:25 AM
Re: head work	valleycat	06/03/04 11:08 AM
Re: head work	jeepfun4u2	06/03/04 03:15 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.483s Queries: 16 (3.480s) Memory: 0.5985 MB (Peak: 0.6315 MB) Data Comp: Off Server Time: 2026-06-21 21:02:45 UTC
Valid HTML 5 and Valid CSS