Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
What's the best "SST" to jumper the computer block #461044 06/07/04 08:05 PM
Joined: Nov 1999
Posts: 278
BallaRat Offline OP
Mudrunner
You know...when timing a 22RE you're supposed to jumper the T1 and E1 connectors. This makes the timing come down (ok, retard, but why must we always be a bunch of retards? <img src="/forums/images/graemlins/smile.gif" alt="" />). You set it at 5 BTDC then when you remove the jumper it should climb to about 12BTDC. Easy, except lately when I use a heavy gauge paper clip it just doesn't make the contact well enough to cause the timing to come down unless I hold it just right. Now since I ain't got 3 hands (wonder why that is) I can't hold the jumper, the timing light, and adjust the distributor at the same time.

What's everyone else use to jumper those? I think I got my timing OK now, but had to kind of guess, check, readjust, etc....


Don West
Gettin'Off4x4 Member
'94 Reg Cab, 1" BL, 33 MTs, Detroit f/r, 4.88s, dual Marlins, blah blah woof woof
Re: What's the best "SST" to jumper the computer block [Re: BallaRat] #461045 06/07/04 08:13 PM
Joined: Jan 2004
Posts: 426
G
GeriatricToy Offline
Mudrunner
I use two male spade connectors. They fit in real nice and tight. <img src="/forums/images/graemlins/shocked.gif" alt="" />


2000 Tacoma SR5 - Bone stock 'cept a little bling.
2000 Tacoma SR5 - Bone stock.
Re: What's the best "SST" to jumper the computer block [Re: BallaRat] #461046 06/07/04 08:14 PM
Joined: Apr 2002
Posts: 5,688
Esquire812 Offline
Trail Leader
Busted in half paper clip. Rigid enough to push through the anti-corrosive slime and make good contact with the terminals. Flexible enough to make the T-E1 jump and expand to make the Fp-B+ jump. When done, slide one end done through the mounting tab of the diagnostic box and it will be there the next time you need it.

~Darin <img src="/forums/images/graemlins/baby.gif" alt="" />


88' 4x4 *22R-EB Gen II*
87' $Runner *22R-EB Gen I*
85' Sillyca 22R-Esq

"I LIVE IN MY OWN WORLD...THEY KNOW ME WELL THERE"
Re: What's the best "SST" to jumper the computer block [Re: GeriatricToy] #461047 06/07/04 08:29 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
Quote
I use two male spade connectors. They fit in real nice and tight. <img src="/forums/images/graemlins/shocked.gif" alt="" />


That's what I use on my '85 (different type of connector):

[Linked Image]

Short length of wire and two bare male spade lugs, of the right size, crimped on the end.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.013s Queries: 15 (0.009s) Memory: 0.6026 MB (Peak: 0.6585 MB) Data Comp: Off Server Time: 2026-11-17 13:48:14 UTC
Valid HTML 5 and Valid CSS