|
|
|
|
Rodeo Issues
#461420
06/08/04 09:08 PM
|
Joined: Oct 2001
Posts: 779
OP
Rock Warrior
|
Here's the deal.I have a 95.5 Rodeo with the 3.2 SOHC and an auto tranny.
The other day I went to pick the wife up from work and on the way there it died and when I refired it the check tranny light was flashing and it was in a sorta "limp mode".
This happened more frequently until Saturday when it died and took forever to refire.Again this tranny light came on.Now after changing plugs,wires,fuel filter and fuel pump and checking to see if the injectors are firing and to see if I have spark it will not start at all.The Tranny light seems to be working great though.
I have been through my Haynes manual so many times I almost know it word for word.I haven't found anything in it about what's happening.All the stuff it recommends to check for "turning over but not starting"have either been replaced or checked.
Anyone have any ideas???I am lost???If I had any shells for the shotgun one of us would be dead by morning...That Rodeo and me can't be livin under the same roof if it's gonna act like this!
signed, Helpless in Yuppie Hell
<img src="/forums/images/graemlins/shiner.gif" alt="" />
I got your Jeep thing and now it burns when I pee! http://www.mwior.com/ The "Official" web page for an "Official" MWIOR!!
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.479s Queries: 15 (3.477s) Memory: 0.6066 MB (Peak: 0.6396 MB) Data Comp: Off Server Time: 2026-06-06 10:45:56 UTCValid HTML 5 and Valid CSS