IDing motor sizes and auto trans in gen 1 4 cyl?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: IDing motor sizes and auto trans in gen 1 4 cyl? [Re: BobShaw] #461555 06/10/04 09:40 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

I think the torqueflite was a KM146 in <87 gen1's and I'm sure it was a KM148 in 87 and up. M/t is a km145 in all models until they started using the V5MT?? 4G62 belt drive 2.0 was used in 86 and earlier along with 2.6 4G54.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
IDing motor sizes and auto trans in gen 1 4 cyl?	carnuck	06/09/04 01:10 AM
Re: IDing motor sizes and auto trans in gen 1 4 cyl?	Big Blue	06/09/04 01:24 AM
Re: IDing motor sizes and auto trans in gen 1 4 cyl?	BobShaw	06/10/04 03:07 PM
Re: IDing motor sizes and auto trans in gen 1 4 cyl?	fasteddy	06/10/04 09:40 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.429s Queries: 16 (3.427s) Memory: 0.5993 MB (Peak: 0.6323 MB) Data Comp: Off Server Time: 2026-06-01 19:39:33 UTC
Valid HTML 5 and Valid CSS