Double Carden center bearing.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Double Carden center bearing. #461645 06/09/04 03:49 AM

Joined: Nov 2003

Posts: 99

South Austin, TX

TATER

Getting the Wheeling Fever

http://www.4x4wire.com/toyota/tech/cvmod/ANGLE2.jpg

I recently had a d-shaft rebuilt on my DD and the shop charged $90 for the center bearing of the CV(assuming they actualy put it in). I wanna use a front cv-joint for the rear of a dual case Runner. The slip is wasted, so I bet the center bearing is shot. I would like a part # for this to avoid paying a shops mark-up next time. A friend gets dealer parts are a killer discount.

Entire Thread
Subject	Posted By	Posted
Double Carden center bearing.	TATER	06/09/04 03:49 AM
Re: Double Carden center bearing.	Anonymous	06/09/04 05:55 AM
Re: Double Carden center bearing.	TATER	06/10/04 12:46 AM
Re: Double Carden center bearing.	Anonymous	06/10/04 05:18 PM
Re: Double Carden center bearing.	4Crawler	06/10/04 05:25 PM
Re: Double Carden center bearing.	TATER	06/10/04 06:49 PM
Re: Double Carden center bearing.	Anonymous	06/10/04 01:10 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.947s Queries: 15 (3.945s) Memory: 0.6049 MB (Peak: 0.6379 MB) Data Comp: Off Server Time: 2026-06-10 04:30:52 UTC
Valid HTML 5 and Valid CSS