Bolting also to the pinch seam?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bolting also to the pinch seam? [Re: FrankR] #462778 06/11/04 08:45 PM

Joined: Jul 2000

Posts: 388

Thornton, Colorado, USA

skidplate98 Offline

Mudrunner

I agree!

Quote

I've never even seen a pair of sliders up close and personal, but if I decided to use 'em, there's no way in this world I'd let anyone bolt them to the body seam..... that's just asking for rust - not to mention that any pressure on the seam might bend the lower body. Make sure they're braced well enough and trust 'em to take the weight before touching the body.

Just my opinion.

Frank

98 LS Montero Sport
32" MTRs
2" shackle lift
ARB bumper
Custom Rock sliders
Custom rear bumper

Entire Thread
Subject	Posted By	Posted
Bolting also to the pinch seam?	skidplate98	06/11/04 05:51 PM
Re: Bolting also to the pinch seam?	off-roader	06/11/04 06:22 PM
Re: Bolting also to the pinch seam?	DougH	06/11/04 06:26 PM
Re: Bolting also to the pinch seam?	PHIL_	06/11/04 06:33 PM
Re: Bolting also to the pinch seam?	skidplate98	06/11/04 06:59 PM
Re: Bolting also to the pinch seam?	off-roader	06/11/04 08:37 PM
Re: Bolting also to the pinch seam?	skidplate98	06/14/04 04:42 PM
Re: Bolting also to the pinch seam?	off-roader	06/14/04 05:04 PM
Re: Bolting also to the pinch seam?	FrankR	06/11/04 08:20 PM
Re: Bolting also to the pinch seam?	skidplate98	06/11/04 08:45 PM
Re: Bolting also to the pinch seam?	BobShaw	06/15/04 03:42 AM
Re: Bolting also to the pinch seam?	FrankR	06/15/04 04:09 AM
Re: Bolting also to the pinch seam?	off-roader	06/15/04 06:38 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: