|
|
|
|
damn power door locks..
#463918
06/14/04 05:07 AM
|
Joined: May 2001
Posts: 67
OP
Getting the Wheeling Fever
|
'95 Rodeo (1st gen) ... as most of you know, the power locks are quite flimsy since all you do is pull the driver door lock up/down and the rest go up/down - there's no "button" for it on the panel. I've had the passenger door lock "broken" for a while now... have to lock/unlock that particular one manually... because my passengers pull on it before I can open it for them... and today my rear driver side decides to break because it's been pulled manually too much. Anyone else seeing this ?
I have keyless entry so this becomes more a P.I.T.A... it'll unlock ok, but never go back down unless I manually push it. Questions:
1) Is this something I can easily fix myself ? I recall asking a while ago and there's something with the actuators. Are the parts inexpensive and easy to fix ?
2) If I get a remote start system, that comes with a new keyless entry... will the guys fix these problems for me ?
3) More of a long shot... I've got dents on the passenger door anyway and since that lock is broken too... how easy is it to replace the entire door from one from the junkyard or something ? Any other ideas to find doors ?
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.564s Queries: 15 (3.562s) Memory: 0.6000 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-22 19:47:24 UTCValid HTML 5 and Valid CSS