Cruiser Rims onto an 88 4Runner

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Cruiser Rims onto an 88 4Runner [Re: Mean__Gene] #465886 06/23/04 09:15 PM

Joined: Aug 2003

Posts: 2,854

Toronto, Canada

Greg_Canada Offline

Roll Me Over

They're identical unless the backspacing is different (which it might be for the better)
Tell him to measure the backspacing.
I say they will fit 100% if you don't have a suspension lift.

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim

Entire Thread
Subject	Posted By	Posted
Cruiser Rims onto an 88 4Runner	Mean__Gene	06/18/04 05:36 PM
Re: Cruiser Rims onto an 88 4Runner	Greg_Canada	06/23/04 09:15 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.585s Queries: 16 (3.583s) Memory: 0.5931 MB (Peak: 0.6261 MB) Data Comp: Off Server Time: 2026-06-15 17:03:40 UTC
Valid HTML 5 and Valid CSS