Ya might consider the junkyard route, 'cept take it one step further. Look for a set of doors that have hinges, handles, mirrors, and latches in good working condition, but are otherwise all screwed up - rusted out, dented, broken glass, etc. Pull 'em off and make the junkyard man an offer -- if they were in good condition they'd easily sell, but in this shape, you're the only one who'd want them, so you should get them cheap if the junkyard guy isn't a complete idiot. Makes more sense to get 10 bucks from you for the doors than to let them sit in the junkyard for an eternity, because most "sane" people buying junkyard doors are getting them to REPLACE doors that are in exactly the condition you're trying to PURCHASE.

Anyway, once you have the doors, you can try to keep the mechanicals in tact while removing/replacing/refurbishing the sheet metal and cutting them to your liking. I've always envisioned something similar to the Jeep half doors with the front end cut just above the upper hinge and the rear end down lower. Then remove the skin in the center area of the door 'cept where the handle is, add a little "door edge trim" for your local auto parts store, and effectively you have "factory" half doors for cheap, that is, if the junkyard man is willing to wheel and deal on something he most likely couldn't otherwise sell....

My 2 cents,
Chris