Backspacing question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Backspacing question [Re: NJ_dup1] #466404 06/20/04 04:20 AM

Joined: Oct 2002

Posts: 2,285

Boston (roslindale)

CPOM

Body Damage is Cool

To measure your backspacing just get 2 rulers. One to measure the depth, the other to act as a reference point. (so you can make a perpendicular angle)

I run 3.75" backspacing on my truck with 12.5" tires and they stick out in the back 1-2". The front is even for some reason (maybe due to the fact its lifted high)

CHRIS
98 Amigo, 92 Pup

need a pickup 1st gen fuel level sender

Entire Thread
Subject	Posted By	Posted
Backspacing question	NJ_dup1	06/20/04 02:50 AM
Re: Backspacing question	CPOM	06/20/04 04:20 AM
Re: Backspacing question	randii	06/20/04 08:56 PM
Re: Backspacing question	JOEDIRT	06/21/04 12:55 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.392s Queries: 16 (3.390s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-05-28 07:46:00 UTC
Valid HTML 5 and Valid CSS