89 ecu to a 90 Monty

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 89 ecu to a 90 Monty [Re: merikgvr4&sr] #467532 06/22/04 06:55 PM

Anonymous

Unregistered

I just changed engines and put a 1990 engine into a 1989. It started and idles fine. I haven't drove it much but I know it's working. I dont know how it would work opposite of what I got. I also know someone who put a 1990 ECU in their 1989. I guess theres been some confussion about this and I don't understand all the logistics but thats what has been my experience.

Entire Thread
Subject	Posted By	Posted
89 ecu to a 90 Monty	merikgvr4&sr	06/22/04 04:45 PM
Re: 89 ecu to a 90 Monty	FrankR	06/22/04 04:57 PM
Re: 89 ecu to a 90 Monty	Anonymous	06/22/04 06:55 PM
Re: 89 ecu to a 90 Monty	merikgvr4&sr	06/22/04 09:10 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.516s Queries: 16 (3.513s) Memory: 0.5962 MB (Peak: 0.6292 MB) Data Comp: Off Server Time: 2026-06-10 23:31:04 UTC
Valid HTML 5 and Valid CSS