Thanks Joel. I don't know if my values are low or not. I pulled the switch and wiped it off, but there was no buildup. I also made sure the bleed hole in the manifold was not blocked and reset the check engine light. I didn't find anything that makes me think this will keep the light from returning. <img src="/forums/images/graemlins/frown.gif" alt="" />

So an intermittent failure could be a ground, or the MDP itself? I am assuming from your description the MDP is a transducer that reports data to the computer rather than a DP "switch" that opens/closes at a given DP.

I think I read the input signal voltage to the MDP is 5v. I need to find that info again and find out what type of signal voltage it should be returning to the computer.

Thanks again.

Last edited by davemtb; 06/22/04 07:28 PM.

Dave Smith
'96 SR - 31x10.5 Tires

"Facts are meaningless. You could use facts to prove anything that's even remotely true!" Homer Simpson