Drilling a hole for the Sunpro water temp. guage...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Drilling a hole for the Sunpro water temp. guage... #468062 06/23/04 10:07 PM

Joined: Dec 2003

Posts: 498

Newport News, Voginya

VAHunter17 Offline

Mudrunner

Hey,
I have a Sunpro water temp. guage (mechanical) I need to drill about a 5/8" hole into the firewall to run the sensor line. What's the best, easiest way to do that? I would rather not have to drill a hole, is there another hole I can run it through? Thanks a lot,

Buddy

'98 Tacoma TRD ext.cab 2.7 5spd 6inFabtech sus w/ 33x12.5.15 TrxusSTS on 15x10 DC-1 (Black)

'90 4Runner 3.0auto stock as of now

Entire Thread
Subject	Posted By	Posted
Drilling a hole for the Sunpro water temp. guage...	VAHunter17	06/23/04 10:07 PM
Re: Drilling a hole for the Sunpro water temp. guage...	Anonymous	06/23/04 10:53 PM
Re: Drilling a hole for the Sunpro water temp. guage...	foxtrapper	06/24/04 11:42 AM
Re: Drilling a hole for the Sunpro water temp. guage...	5spd	06/25/04 04:16 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.489s Queries: 15 (3.487s) Memory: 0.5983 MB (Peak: 0.6313 MB) Data Comp: Off Server Time: 2026-06-20 19:27:37 UTC
Valid HTML 5 and Valid CSS