Fixing the hubs goes without saying, but, if I got a new 19 year old Jeep, and had a problem in the front end, I would pull the whole thing apart (except ball joints) and check everything out. Wheel bearings, spindle bearing, and U joints. I would also pull the diff cover and check conditions in there. When I got my 86 the tranny and both diffs were full of water. I also had bad spindle bearings and one bad wheel bearing, one obviously bad u joint (if one's bad change 'em both) and one bad u joint that was not obvious at all till I pulled the axel. (don't forget to change all fluids, check all u joints, brakes, axel bearings, tie rod ends and such, you know, routine new CJ stuff.) <img src="/forums/images/graemlins/kewl.gif" alt="" />