ubolt flip question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: ubolt flip question [Re: foxtrapper] #468848 06/29/04 03:07 PM

Anonymous

Unregistered

I'm not sure if the 2wd spring plates would work or not. I used Ford Ranger plates that I drilled out for my 9/16" ubolts. Seems to have worked nice.

For the front I just made new plates from 3/8" plate.

Entire Thread
Subject	Posted By	Posted
ubolt flip question	whitetoy	06/26/04 04:43 AM
Re: ubolt flip question	foxtrapper	06/29/04 02:12 PM
Re: ubolt flip question	Anonymous	06/29/04 03:07 PM
Re: ubolt flip question	Elbow_Greese	06/29/04 04:59 PM
Re: ubolt flip question	ToyinAround	06/30/04 03:55 AM
Re: ubolt flip question	Anonymous	06/30/04 07:42 AM
Re: ubolt flip question	ToyinAround	06/30/04 08:11 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.977s Queries: 16 (3.974s) Memory: 0.6028 MB (Peak: 0.6358 MB) Data Comp: Off Server Time: 2026-11-04 15:16:33 UTC
Valid HTML 5 and Valid CSS