need help...v6 third in a 4 cylinder housing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

need help...v6 third in a 4 cylinder housing #468968 06/27/04 12:51 AM

Joined: Feb 2003

Posts: 40

Oakland, CA

wlew

Getting the Wheeling Fever

I have a 85 4runner with a 4 cylinder third that is bad. I purchased a v6 third with precsion gears and an ARB. Everything I've read say the 4cylinder and v6 thirds are interchangeable. I took out the 4 cylinder third and trying to install the v6 third and I can't get it to fit. Do I need to modify the housing? Thanks in advance for the help

Wilson

Entire Thread
Subject	Posted By	Posted
need help...v6 third in a 4 cylinder housing	wlew	06/27/04 12:51 AM
Re: need help...v6 third in a 4 cylinder housing	ZUK	06/27/04 01:00 AM
Re: need help...v6 third in a 4 cylinder housing	4Crawler	06/27/04 01:08 AM
Re: need help...v6 third in a 4 cylinder housing	wlew	06/27/04 01:20 AM
Re: need help...v6 third in a 4 cylinder housing	4Crawler	06/27/04 01:43 AM
Re: need help...v6 third in a 4 cylinder housing	Vonka	06/28/04 07:21 AM
Re: need help...v6 third in a 4 cylinder housing	wlew	06/29/04 07:24 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.926s Queries: 15 (3.924s) Memory: 0.6048 MB (Peak: 0.6378 MB) Data Comp: Off Server Time: 2026-06-13 03:42:54 UTC
Valid HTML 5 and Valid CSS