need help...v6 third in a 4 cylinder housing

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: need help...v6 third in a 4 cylinder housing [Re: wlew] #468971 06/27/04 01:20 AM

Joined: Feb 2003

Posts: 40

Oakland, CA

wlew

Getting the Wheeling Fever

It feels like the ring gear is hitting the housing. It's 5.29 gears. I'll try grinding the housing.

Thanks

Wilson

Last edited by wlew; 06/27/04 01:21 AM.

Entire Thread
Subject	Posted By	Posted
need help...v6 third in a 4 cylinder housing	wlew	06/27/04 12:51 AM
Re: need help...v6 third in a 4 cylinder housing	ZUK	06/27/04 01:00 AM
Re: need help...v6 third in a 4 cylinder housing	4Crawler	06/27/04 01:08 AM
Re: need help...v6 third in a 4 cylinder housing	wlew	06/27/04 01:20 AM
Re: need help...v6 third in a 4 cylinder housing	4Crawler	06/27/04 01:43 AM
Re: need help...v6 third in a 4 cylinder housing	Vonka	06/28/04 07:21 AM
Re: need help...v6 third in a 4 cylinder housing	wlew	06/29/04 07:24 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.525s Queries: 16 (3.523s) Memory: 0.6044 MB (Peak: 0.6374 MB) Data Comp: Off Server Time: 2026-06-15 22:39:08 UTC
Valid HTML 5 and Valid CSS