Its not that diffacult... is it?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Its not that diffacult... is it? #469003 06/27/04 01:32 AM

Joined: Sep 2003

Posts: 34

Seattle, Wa

j03

Getting the Wheeling Fever

Basicly I need to do this http://www.4x4wire.com/forums/showf...mp;amp;sb=5&o=14&fpart=1

But it seems to be an impossible one man job. No matter what I do I cant pull/push the axle shaft far enough to get the clips on and if I let go the tention from the boots just pulls the axle shaft back in. Its driving me nuts..

Should it be this friggen hard?

90 Trooper 2.6 - AMC head

Entire Thread
Subject	Posted By	Posted
Its not that diffacult... is it?	j03	06/27/04 01:32 AM
Re: Its not that diffacult... is it?	Bigpoppax2	06/27/04 01:16 PM
Re: Its not that diffacult... is it?	j03	06/27/04 03:35 PM
Re: Its not that diffacult... is it?	Anonymous	06/27/04 09:17 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.946s Queries: 15 (3.944s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-24 12:11:57 UTC
Valid HTML 5 and Valid CSS