Needed: "Pulley Immobilizer" tool for 3.5L Timing Belt

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Needed: "Pulley Immobilizer" tool for 3.5L Timing Belt #474306 07/09/04 07:03 PM

Anonymous

Unregistered

I had a friend fab me a spanner for this purpose. Piece of plate steel with a hole in the center to allow socket access, welded to a piece of plate (~2" x 24") as a handle, two bolts welded to the lower plate to fit in the bolt holes on the pulley.

Entire Thread
Subject	Posted By	Posted
Needed: "Pulley Immobilizer" tool for 3.5L Timing Belt	Anonymous	07/09/04 04:21 PM
Re: Needed: "Pulley Immobilizer" tool for 3.5L Timing Belt	Ed C	07/09/04 04:51 PM
Re: Needed: "Pulley Immobilizer" tool for 3.5L Timing Belt	sweater	07/09/04 05:37 PM
Re: Needed: "Pulley Immobilizer" tool for 3.5L Timing Belt	Anonymous	07/09/04 07:03 PM
Re: Needed: "Pulley Immobilizer" tool for 3.5L Timing Belt	Dark_Angel	07/10/04 06:47 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.599s Queries: 15 (3.597s) Memory: 0.5961 MB (Peak: 0.6290 MB) Data Comp: Off Server Time: 2026-06-20 11:16:33 UTC
Valid HTML 5 and Valid CSS