How I plumbed the stock LSPV out of my brake system

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

How I plumbed the stock LSPV out of my brake system #475130 07/12/04 05:55 AM

Joined: Nov 1999

Posts: 863

Spring Hill, TN

DRM

Rock Warrior

http://www.4x4spot.com/proportioning.htm

Seems there are several ways to do this - mine involved using stock Toyota parts and didn't require re-flaring a single brake line <img src="/forums/images/graemlins/kewl.gif" alt="" />

David David's 4x4Spot.com

Entire Thread
Subject	Posted By	Posted
How I plumbed the stock LSPV out of my brake system	DRM	07/12/04 05:55 AM
Re: How I plumbed the stock LSPV out of my brake system	Adam F	07/12/04 06:13 AM
Re: How I plumbed the stock LSPV out of my brake system	DRM	07/12/04 06:16 AM
Re: How I plumbed the stock LSPV out of my brake system	4Crawler	07/12/04 06:42 AM
Re: How I plumbed the stock LSPV out of my brake system	Adam F	07/12/04 02:24 PM
Re: How I plumbed the stock LSPV out of my brake system	4Crawler	07/12/04 04:26 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.504s Queries: 15 (3.502s) Memory: 0.6019 MB (Peak: 0.6349 MB) Data Comp: Off Server Time: 2026-06-21 07:48:46 UTC
Valid HTML 5 and Valid CSS