How I plumbed the stock LSPV out of my brake system

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How I plumbed the stock LSPV out of my brake system [Re: Adam F] #475135 07/12/04 04:26 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

You might want to check and see how close the rod is to the top of travel. I set mine up so that its just a little below the top of travel. When I had it set fully up, I could lock up my old 33x15.50 Swampers, no problem.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
How I plumbed the stock LSPV out of my brake system	DRM	07/12/04 05:55 AM
Re: How I plumbed the stock LSPV out of my brake system	Adam F	07/12/04 06:13 AM
Re: How I plumbed the stock LSPV out of my brake system	DRM	07/12/04 06:16 AM
Re: How I plumbed the stock LSPV out of my brake system	4Crawler	07/12/04 06:42 AM
Re: How I plumbed the stock LSPV out of my brake system	Adam F	07/12/04 02:24 PM
Re: How I plumbed the stock LSPV out of my brake system	4Crawler	07/12/04 04:26 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.948s Queries: 16 (3.943s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-11-02 08:53:05 UTC
Valid HTML 5 and Valid CSS