|
|
|
|
 Stock wheel width
#477051
07/16/04 06:56 PM
|
Joined: Jan 2003
Posts: 81
OP
Getting the Wheeling Fever
|
Anyone know off hand what width these wheels are? http://www.4x4wire.com/cgi-bin/gall...e_Henwood.jpg&img=36&tt=I just recently had some 31X10.5 BFG AT's mounted on them and the edges of the tires aren't sitting flush on the ground at 30psi. I was bouncing around the idea of getting some 15X7 alloys(if they are wider than what I have). Also, I have a friend here in town that works at 4Wheel Parts and he could get me the black mods for really cheap but says I might have backspacing issues. Any tips?, I've done some searches on this topic but didn't readily find it. Thanks, Jeff
Last edited by busboy; 07/16/04 06:57 PM.
88'4Runner, 22RE, at, bone stock gutless slug. [b]Need a stock skid plate![b]
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 7.187s Queries: 15 (3.481s) Memory: 0.6055 MB (Peak: 0.6385 MB) Data Comp: Off Server Time: 2026-06-11 16:52:50 UTCValid HTML 5 and Valid CSS 
